Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultramid® B50L 01 - PA6 - BASF

Material Data Center offers the following functions for Ultramid® B50L 01:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Ultramid B datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Propiedades mecánicas - Propiedades térmicas - Otras propiedades - Propiedades específicas del material
Any use of this information falls under the rules of our disclaimer.
Propiedades mecánicasValorUnidadesMétodo de ensayo
ISO Data
Módulo de tracción 3000 MPa ISO 527
Esfuerzo de fluencia 90 MPa ISO 527
Alarg. en límite elástico 4.5 % ISO 527
Propiedades térmicasValorUnidadesMétodo de ensayo
ISO Data
Temperatura de fusión, 10°C/min 220 °C ISO 11357-1/-3
Estabilidad al calor, 1.80 MPa 65 °C ISO 75-1/-2
ASTM Data
Temperatura de fusión 220 °C ASTM D 3418
Otras propiedadesValorUnidadesMétodo de ensayo
Absorción de agua 9.5 % Sim. to ISO 62
Absorción de humedad 2.6 % Sim. to ISO 62
Densidad 1130 kg/m³ ISO 1183
Moisture Content 0.06 % -
Absorción de agua, equilibrio 2.6 % ASTM D 570
Densidad 1130 kg/m³ ASTM D 792
Propiedades específicas del materialValorUnidadesMétodo de ensayo
ISO Data
Indice de viscosidad 320 cm³/g ISO 307, 1157, 1628
Características
Procesamiento y forma de entrega
Extrusión de película soplada, Extrusión de tubería, Extrusión de perfiles, Extrusión de láminas, Moldeo por soplado
Aditivos
Lubricante
Certifications
Contacto con alimentos, Aprobado por el FDA 21 CFR
Applicaciones
Uso general
Disponibilidad regional
Norteamérica
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.